Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Plantation, FL | Warden Gate Repair Fort Lauderdale
We repair Ghost Controls gate openers throughout Plantation, and we do it as an independent shop, not a manufacturer affiliate, specializing in Electric Gate Repair - Plantation. The work here usually comes down to one thing: Plantation’s rust-heavy decorative iron gates put strain on Ghost Controls motors in ways a cookie-cutter repair won’t catch. If your opener is grinding, slamming, or dead after a storm, call (754) 354-9065 and we’ll send a tech who knows exactly what to look for.
Why Plantation Residents Choose Us for Ghost Controls Service
Cole Rafferty, our owner, has spent years diagnosing Ghost Controls operators across Broward County, and he’s built a reputation for one thing in particular: spotting the difference between a motor that’s actually failing and a board or gearset that just needs the right part. On Ghost Controls AXDP and TSS1 openers, that distinction saves Plantation homeowners the cost of a full replacement. We keep OEM Ghost Controls boards, gears, and arms in the truck because the tolerances on the AXDP motor shaft and the Hall-effect sensors are unforgiving. Aftermarket parts often fit poorly and cause erratic limit behavior. We also service equipment from LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, and Mighty Mule, and our full Ghost Controls sales & service page covers the scope of that work. Before any tech arrives at your door in Plantation, you get their name and photo, and you get a written price before the work starts. That’s the Threshold Standard, and it’s not optional on our jobs.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Plantation
- AXDP gearbox stripping under heavy iron gates. Plantation Acres has long driveways and often 14-foot cast-iron swing gates. The AXDP gearset was never designed for that constant load, and we see output gears chewed down to smooth nubs. We replace the gearset, check the post for plumb, and set the force correctly so the new gear doesn’t fail the same way.
- Control board corrosion from humidity and salt air. South Florida’s humidity doesn’t just sit on the surface, it gets inside the control housing. Ghost Controls boards show green corrosion on the relay terminals after a few years near the coast. A board that looks dead may just need cleaning and a good ground, but if it’s gone, we replace it with OEM.
- Phoenix battery swelling and premature failure. Storm-season brownouts are rough on the Phoenix battery backup. We’ve pulled swollen, cracked batteries from Ghost Controls systems that were only two years old. The heat inside a black control box on a Plantation summer afternoon doesn’t help either. We test the charging circuit before replacing the battery so you’re not back in the same spot by September.
- TSS1 limit switch drift after lightning surges. Lightning in Plantation likes to ride the power lines into gate openers. The TSS1 slide opener’s limit switches can drift after a surge, so the gate either stops short or overshoots. That’s a recalibration and a surge-protector check, not a motor replacement.
- Hinge and post wear that mimics opener failure. We regularly see Ghost Controls openers blamed for problems that actually start at the hinge. A rust-pitted post or a sagging hinge makes the opener fight the gate every cycle, which burns out the motor and strips the gearbox. We do hinge and post repair in Plantation before the opener gets blamed again.
Ghost Controls Service in Plantation: What Local Conditions Mean for Your Equipment
Plantation has one of Broward County’s highest concentrations of 1980s decorative iron swing gates on HOA-controlled lots, which is why our Gate Repair - Plantation service focuses on these unique conditions. That shapes every Ghost Controls repair we do here, because the opener arm almost always has to come off a rust-pitted post while a property manager watches for code compliance. The gate’s ironwork may be fifty years old, the hinge post may be 3 degrees out of plumb, and the Ghost Controls AXDP that swings it may be the third opener that lot has seen. When a post leans or a hinge sags, the opener has to work harder on every single cycle, and that’s what strips the gearbox and burns the motor. On a long driveway off Old Hiatus Road in Plantation Acres, our tech found exactly that: an AXDP swinging a 14-foot iron gate that had sagged onto the safety loop. The gearbox had chewed its output gear, the hinge post was out of plumb, and the Phoenix battery had ballooned. We welded a new hinge reinforcement, reset the post, replaced the gearset and battery, and set the force so tightly the gate swings silent even after a summer downpour. That’s the kind of repair Plantation gates need, and it’s not what a parts-swapper does. Cole Rafferty trained at Los Angeles Trade-Technical College and spent years on gates up and down the West Coast before running crews in Fort Lauderdale, so he’s seen enough corroded iron to know when a repair is worth doing and when a new opener honest-to-goodness makes more sense. A locked gate only protects you if it actually locks.
Ghost Controls Models & Products We Service in Plantation
We work on the AXDP series swing gate openers, the TSS1 series slide gate openers, the GHTS1 hinge arm kits, and the Phoenix battery backup systems. Our parts philosophy is simple: we try OEM Ghost Controls boards, gears, and arms first, because the Hall-effect sensors on the AXDP motor shaft don’t tolerate aftermarket substitutions well. If OEM is backordered and you need the gate moving today, we’ll use a proven aftermarket transformer or capacitor, and we’ll tell you exactly what we did and why. We also stock common Ghost Controls parts locally so most Plantation repairs happen in one visit, not two.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Plantation
Ghost Controls gate repair in Plantation typically runs between $180 and $340 for most board, gearset, or battery work, while a full opener replacement usually lands between $850 and $1,800 depending on the model and the condition of the posts and hinges. The price drivers are simple: whether the post needs work, whether the hinge has to be welded, and whether the Phoenix battery gave out at the same time as the board. Every estimate includes the diagnosis, the labor, and the parts in one written number before any work starts. Call (754) 354-9065 and we’ll give you a real dollar range over the phone, then a written quote after the tech sees the gate.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Plantation
The Phoenix battery in your Ghost Controls system has two enemies in Plantation: heat and brownouts. May through October brings daily storms and voltage dips that trigger the battery into cycles it was never meant to run, while the black control box bakes in the sun. We test the charging circuit and the battery’s internal resistance to tell you whether it’s a weak Phoenix or a board that’s overcharging it. Call (754) 354-9065 for an exact diagnosis, estimates are free.
Nine times out of ten in Plantation, that slam comes from a hinge post that’s drifted out of plumb or a hinge that’s rusted stiff. The AXDP force setting has to push through the bind, and when the gate finally breaks free, it slams. We check the post and hinges before we touch the opener settings. If the hardware is sound, then it’s a force or limit adjustment on the Ghost Controls board.
HOA rules in Plantation’s gated communities usually require a gate to be operational and code-compliant, and they don’t care that the opener failed. We repair Ghost Controls openers quickly, and we know the local code requirements that property managers watch for, so the fix satisfies the HOA’s inspection. If the gate is down, call (754) 354-9065 and we’ll get a tech scheduled fast.
Ghost Controls warranties apply to the original parts, not the work around them, so an aftermarket board won’t void a warranty on a part we didn’t replace. But on AXDP and TSS1 systems, we’ve seen too many aftermarket boards cause erratic limit and force behavior to recommend them as a first choice. We use OEM Ghost Controls parts first, and only reach for aftermarket when OEM is unavailable and you need the gate running now.
Probably not a code issue, it’s more likely a short in the keypad wiring or a failing receiver antenna on the sidewalk side. Salt air and humidity corrode the connection points on the exterior keypad, and the antenna range drops. We test the keypad, the wiring, and the receiver, and replace only what’s actually failed. Call (754) 354-9065 for a free estimate.
Service Areas Near Plantation
We run Ghost Controls service calls throughout Plantation and the surrounding communities. Our techs are regularly in Fort Lauderdale, Tamarac, Oakland Park, and Dania Beach. If you’re just outside Plantation, we probably cover you too. Check the Plantation service area page for exact boundaries. We also provide Ghost Controls service in Fort Lauderdale and Ghost Controls service in Ojus.
Book Your Ghost Controls Service in Plantation Today
If your Ghost Controls opener is grinding, dead, or slamming in Plantation, call (754) 354-9065 now. We answer 24/7 with a live person, not a voicemail, and we can often get a tech to your gate the same day. You’ll get a name, a photo, and a written price before the work starts. Every repair is backed by our 365-Day Done Right Promise, so if the fix doesn’t hold, we come back free.
Written by Cole Rafferty, Owner at Warden Gate Repair Fort Lauderdale, serving Plantation since 2008.