Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Plantation, FL
Gate repair in Plantation comes with a particular set of conditions: older iron gates on mid-century homes, newer gated communities with HOA requirements, and a humid, storm-heavy climate that wears down openers and hinges faster than drier parts of Florida. We specialize exclusively in gate repair, electric gate repair, and gate motor repair, which means every truck we send out is stocked for this one kind of work. If your gate is stuck, grinding, or making a sound it didn’t make last month, call (754) 354-9065 and a real person answers, day or night.
Why Plantation Homes Are Different
Plantation’s housing stock spans two distinct eras, and each one fails in its own way. The mid-century single-family homes, many built in planned subdivisions between the 1960s and 1980s, often carry decorative iron driveway gates with electromechanical openers that are now decades old. Those opener motors were not designed for 30 years of Florida heat and humidity, and control boards corrode from the inside while the gate still looks fine from the street.
Then there are the gated communities, which add a layer most service calls don’t have: HOA rules. In Plantation, some associations require that any gate hardware or opener replacement match the community’s original spec, and they typically want a written quote submitted before work begins. We deal with that regularly and can provide the documentation an HOA board asks for. In Plantation Acres, we see a different problem: custom swing gates on long estate driveways, built heavy in wood or iron, that put constant strain on the opener motor. Gear failures there are common enough that we keep the common gear kits for those larger gates on the truck.
Styles & brands we work with
Our Main Plantation Services
Most Plantation homeowners call us about one of three problems: a gate that won’t open, an electric system that’s dead, or a motor that runs but won’t move the gate. Each has its own Plantation page below, so you can read the details that apply to your situation.
Gate Repair in Plantation
A gate that drags, sticks, or sits crooked is usually a mechanical problem: bent hinges, a wheel off its track, or ironwork that’s rusted and pulling out of true. In Plantation’s humidity, steel hardware corrodes a little faster every year, and a gate that was fine in January can bind by August. We repair the gate itself before it takes the opener down with it, and every job includes a written price before we touch a single bolt. Gate Repair in Plantation
Electric Gate Repair in Plantation
When a gate stops responding to the remote or keypad, the fault is often in the wiring, the control board, or the safety sensors rather than the motor itself. Plantation’s afternoon thunderstorms and power surges take a real toll on control boards, and older electric systems frequently lack the battery backup that newer codes expect. We diagnose the electrical side methodically and carry the boards and sensors for the brands most common around Plantation. Electric Gate Repair in Plantation
Gate Motor Repair in Plantation
The gate motor, the box that slides or swings your gate automatically, works harder in Plantation than it would almost anywhere else: heat, humidity, and heavy gates all shorten its life. In Plantation Acres especially, we see opener motors that have been straining against gates far heavier than the motor was rated for, and the gears pay for it. If your motor hums but the gate doesn’t move, or you hear grinding from inside the housing, that’s a motor problem and it won’t fix itself. Gate Motor Repair in Plantation
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Plantation
We’re factory-trained on the brands we see most often in Plantation: LiftMaster, BFT, Linear, Viking, Ghost Controls, FAAC, DoorKing, Elite, and Mighty Mule. Our trucks carry the common parts for these systems, so many Plantation jobs finish the same day we start them. When a part isn’t on the truck, we know exactly what to order from our brands and can usually have it within a day or two.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Plantation, FL
| Service | Typical range in Plantation |
|---|---|
| Gate repair (mechanical, no parts) | $120 – $300 |
| Electric gate diagnostic and minor wiring repair | $150 – $350 |
| Gate motor replacement (standard swing opener) | $450 – $900 |
| Gate motor replacement (heavy slide opener, Plantation Acres style) | $800 – $1,600 |
| Control board replacement | $250 – $600 |
| Hinge replacement (set of 2, iron gate) | $200 – $450 |
| Safety sensor replacement (pair) | $150 – $300 |
| Keypad replacement or programming | $100 – $250 |
| Battery backup installation | $300 – $550 |
| Full gate tune-up (lubricate, align, test, adjust) | $150 – $300 |
Plantation prices run slightly higher than inland cities for two reasons: the humidity accelerates corrosion, so hardware that looks fine often hides rust and needs replacing rather than patching, and heavy decorative iron gates are harder on motors and hinges than lighter aluminum. Whatever the number, you get it in writing before we start, and that’s the price you pay.
Neighborhoods We Serve in Plantation
We work across all of Plantation, from the older subdivisions near Broward Boulevard to the estate lots of Plantation Acres and the gated communities along Nob Hill Road. Our typical response time in the Plantation area is same-day for urgent failures and next-day for scheduled work.
- Plantation Acres
- Jacaranda
- Plantation Isles
- Reflection Lake
- Melaleuca Estates
Service Area – Cities Near Plantation
In addition to our Plantation coverage, we serve the surrounding Broward cities with the same technicians and the same written-price promise. If you’re just across the city line, check our Fort Lauderdale, FL page for local details. Dispatch and scheduling for the Plantation area are coordinated from our South Florida office, with crews serving Plantation locally.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Plantation
For an urgent failure, like a gate stuck open or a motor that’s dead, we can usually reach most Plantation neighborhoods the same day you call. For scheduled work and tune-ups, next-day is typical. The actual time depends on where you are in Plantation and what’s already on the schedule, but a live person answers 24/7 and will tell you straight.
It depends on your community. Many gated Plantation neighborhoods require that replacements match the original spec, and some want a written quote before work starts. We can provide that quote and technical detail on the same day, and we’re used to working with HOA boards. If you’re unsure whether yours requires approval, call us and we’ll tell you what we’ve seen in your area.
Most mechanical gate repairs run $120 to $300 before parts, while a motor replacement typically lands between $450 and $1,600 depending on the motor type and gate weight. You’ll always get a written price before any work begins, so the number on the quote is the number you pay. Call (754) 354-9065 and we’ll give you a real range for your specific gate, not a guess.
When your gate stops working in Plantation, you want someone who knows the difference between a 1970s iron swing gate and a modern gated-community system, because the fix is not the same. Call (754) 354-9065 for a free estimate, and you’ll know who’s coming to your door before we ever pull into your driveway.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Plantation Customers Say
"Slide gate stopped halfway and the motor just hummed. Tech showed his ID, tested the limit switch and found a worn roller wheel. Replaced both and the gate glides again."
- Curtis B."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R."Gate was closing on my truck bumper. The loop detector had failed. Replaced it and adjusted the force setting."
- Dina K.