Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Broadview Park, FL
Warden Gate Repair is the home gate company Broadview Park homeowners call when a gate stops closing, a motor burns out, or a welded hinge finally gives up after 30 years of salt air. Most Broadview Park properties were built between the 1960s and 1980s, which means the gates are often custom, older than the cars in the driveway, and sized for lots that give you real distance between the street and the front door. When one of those gates fails, we show up with a written price before any work starts and a technician whose name and photo you already have. Call (754) 354-9065 for a free estimate.
Why Broadview Park Homes Are Different
Broadview Park is unincorporated Broward County, and that detail changes the work. There is no municipal building department here insisting every gate match a code book, so over the decades homeowners have modified, extended, welded, and improvised. We regularly open a control box in Broadview Park and find wiring colors that match nothing on the manufacturer’s diagram, run through conduit someone buried by hand in 1987. That is not a complaint. It is just the reality of working on gates that were built to fit one specific property and then repaired by three different generations of owners.
The lots are generous, which means longer gate runs, heavier panels, and more stress on every hinge and post. Add South Florida humidity, intense sun, and salt air drifting in from the coast, and you get rust on steel components and warping on wood gates at a rate you simply do not see in newer inland communities. After any hurricane warning, plenty of Broadview Park residents take their gate panels down for safekeeping. When they go back up, the alignment is never quite right, and that is when our phone rings. We also notice laxer code enforcement than in Fort Lauderdale or Plantation, which means homeowners sometimes inherit a gate that was never installed to any standard at all. Those jobs take patience and a technician who has seen it before.
Styles & brands we work with
Our Main Broadview Park Services
Most Broadview Park calls fall into three buckets: a gate that will not open or close properly, the electric components that stopped working, or the motor that powers the whole thing. Each has its own page with pricing and what to expect.
Gate Repair in Broadview Park
A sagging, rusted, or misaligned gate on a 1970s Broadview Park home usually needs more than a quick adjustment. We see hinge pins worn into ovals, posts that have shifted in sandy soil, and panels that were never square to begin with. Our team straightens, welds, replaces hardware, and gets the gate moving smoothly again. Gate Repair in Broadview Park covers what a typical repair involves, what it costs, and how quickly we can get there.
Electric Gate Repair in Broadview Park
When the gate swings fine by hand but will not move on its own, the problem is in the low-voltage wiring, the keypad, the safety sensors, or the control board. South Florida humidity is rough on circuit boards, and Broadview Park’s older gates often have wiring that has been spliced more times than anyone remembers. We diagnose the actual fault, replace only what is needed, and leave the system working with the safety edges and sensors tested. Electric Gate Repair in Broadview Park explains how we identify the failure and what to budget.
Gate Motor Repair in Broadview Park
The gate motor (the box that slides or swings your gate automatically) works hard in this climate. Heat, moisture, and daily cycles wear out capacitors, gears, and limit switches. On Broadview Park’s larger lots, the motors are often undersized for the gate they are pushing, which shortens their life considerably. We repair or replace motors on most major brands and always quote a written price first. Gate Motor Repair in Broadview Park has the pricing breakdown and common failure points.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Broadview Park
We are factory-trained on the brands Broadview Park actually has installed: Ghost Controls, DoorKing, Elite, and Mighty Mule among them. Our vans carry common boards, remotes, and safety parts so a repair does not stall waiting on a shipment. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Broadview Park, FL
| Service | Typical range in Broadview Park |
|---|---|
| Gate repair diagnostic visit | $79 – $129 |
| Hinge replacement (standard steel gate) | $180 – $340 |
| Welded gate frame repair | $260 – $520 |
| Gate panel realignment after hurricane removal | $140 – $260 |
| Electric gate troubleshooting | $120 – $240 |
| Safety sensor replacement (set of two) | $180 – $320 |
| Keypad or intercom replacement | $160 – $380 |
| Gate motor capacitor or limit switch repair | $140 – $280 |
| Full gate motor replacement (residential swing) | $850 – $1,800 |
| Control board replacement | $260 – $520 |
In Broadview Park, two things push prices toward the higher end: gates that are larger than standard because of the lot sizes, and the custom modifications that mean we are working around someone else’s earlier repair rather than a clean factory install. Every job starts with a written price agreed before we touch a tool, so the number you approve is the number you pay.
Neighborhoods We Serve in Broadview Park
We work across all of Broadview Park, from the older homes near State Road 7 to the larger lots west toward the turnpike. Here are a few of the areas we are in regularly:
- Broward Estates
- Riverland Village
- Melrose Park
- Broadview neighborhood core
- West Broadview
Response time varies by the size of the gate and the parts needed, but most Broadview Park diagnosis visits happen the same day or next day once you call.
Service Area – Cities Near Broadview Park
We also serve neighboring communities, including Fort Lauderdale, FL, Ojus, FL, Plantation, FL, and Tamarac, FL. If you are right outside Broadview Park, call us and we will let you know which crew covers your street.
Serving Broadview Park, FL - Our Local Coverage Area
We’re based in the Broadview Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Broadview Park
For most repairs and part replacements, no permit is required because Broadview Park is unincorporated and enforcement is light. Replacing an entire gate or adding a new motor setup sometimes triggers a call to the county, and we can help you determine that before work starts.
Most Broadview Park gate failures can be diagnosed the same day or the next morning. The exact window depends on how many calls are already scheduled and whether a part needs to come from our van stock or a supplier. Call (754) 354-9065 and we will tell you straight.
Every repair we make is guaranteed in writing for a full year. If the same repair fails, the return visit is free, including labor. That promise is on every Broadview Park invoice, and we honor it without making you chase someone down.
If your gate is giving you trouble in Broadview Park, call (754) 354-9065 now. You will reach a live person, and we will get a technician with a name and a face to your gate with a written price.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Broadview Park Customers Say
"Slide gate stopped halfway and the motor just hummed. Tech showed his ID, tested the limit switch and found a worn roller wheel. Replaced both and the gate glides again."
- Curtis B."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R."Gate was closing on my truck bumper. The loop detector had failed. Replaced it and adjusted the force setting."
- Dina K.