Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor Repair Across Broadview Park
When a gate motor fails in Broadview Park, it’s rarely a simple swap. Homes here sit on large, unincorporated lots with gates that were often custom-built or modified over decades. That means the motor has to work harder than it would on a standard suburban 6-foot aluminum gate in Plantation or Tamarac. We repair, retrofit, and replace gate motors on these properties every week. Call (754) 354-9065 and a real person answers, day or night.
If your gate motor is grinding, stalling, reversing mid-cycle, or not responding to the remote, we’ll send a technician who knows Broadview Park’s older gate stock and wide openings. You get a written price before any work begins, and the tech’s name and photo before they arrive.
Why Warden Gate Repair Fort Lauderdale Is Broadview Park’s Preferred Gate Motor Repair Company
Warden Gate Repair is the gate-and-opener specialist. We don’t do handyman work, pressure washing, or general contracting. We fix gate motors. That focus matters in Broadview Park because the repair often involves diagnosing a motor that was never sized correctly for the gate it drives. Our techs have seen the DIY chain-drive conversions, the mismatched control boards, and the undersized operators that plague properties along SW 40th Avenue and State Road 7.
Every Broadview Park customer gets the Threshold Standard. That’s a background-checked, identity-verified tech sent to you by name and photo before arrival. You’ll see a photo ID badge at the door before any work starts. It’s a simple system, and it exists because we understand that opening your gate, and your property, to a stranger is a real decision.
Our crews coordinate from the brand’s South Florida office and serve Broadview Park directly. Response is same-day in most cases, because we stock parts locally for the brands most common on these old lots: Ghost Controls, DoorKing, Elite, and Mighty Mule.
Styles & brands we work with
Gate Motor in Broadview Park
Gate Motor repair in Broadview Park means fixing the box that slides or swings your gate automatically. On these large-lot properties, the motor is often a swing-arm operator bolted to a custom steel or wood gate that weighs far more than the motor’s original rating. We diagnose the motor, control board, capacitor, limit switches, and the rack or arm assembly, then quote a written price before touching a single wire.
Most Broadview Park gate motor repairs run $250 – $475. A full motor and operator replacement on a wide driveway gate typically lands between $850 and $1,700, depending on gate weight, length of the power run, and whether we’re adding solar or keypad accessories. Every quote is written, line-itemed, and agreed before work starts.
What a Typical Repair Involves
We check the gate’s travel, the motor’s amp draw, the limit settings, and the condition of the arm or rack. On older Broadview Park gates, we often find the motor is fine but the hinges, post footing, or chain tension are pulling it out of alignment. Fixing the mechanical side first is the only way a new motor lasts.
When Replacement Makes Sense
If your motor is 12+ years old, has been repaired twice, or was under-powered from the start, we’ll tell you straight. Replacement often costs less over three years than repeated component swaps. We carry operators sized for the 16-foot and wider gates common on Broadview Park acreage, not just the residential 10-12 foot standard.
Gate Remote Control in Broadview Park
Gate Remote Control issues in Broadview Park often trace back to the receiver board, not the handheld remote. South Florida humidity corrodes receiver terminals, and older unincorporated properties sometimes run three or four different remote brands across one gate system. We reprogram, replace, or hardwire new receiver kits so every remote, keypad, and vehicle sensor talks to the same motor cleanly.
A standard remote programming visit runs $95 – $180. Replacing the receiver board or adding a new keypad typically costs $180 – $320. If you need the receiver relocated away from a metal gate frame that’s blocking signal, that’s usually included in the board replacement.
Adding or Replacing Remotes
We program factory remotes for Ghost Controls, DoorKing, Elite, and Mighty Mule on-site. If you’ve lost a remote, we can clear all codes and start fresh so no old transmitter still opens your gate. That’s a real security consideration on large lots where the gate is the first and sometimes only line of defense.
Keypad and Intercom Ties
When a keypad stops working but the remote still functions, the problem is usually the keypad’s wiring or its address in the control board, not the motor. We trace that connection, replace corroded splice points, and retest the full opening cycle. Call (754) 354-9065 if you need same-week service.
Trusted Brands We Service in Broadview Park
We’re factory-trained on the gate motors most common on Broadview Park properties: Ghost Controls swing arms, DoorKing slide operators, Elite commercial-grade swing and slide units, and Mighty Mule for lighter residential setups. We stock common boards, remotes, photo eyes, and limit switches for these brands locally, so a repair on one of the older gates off SW 39th Court doesn’t wait on a part from out of state. If your motor is from one of these brands and you’re in Broadview Park, we’re the local team for Gate Motor Repair at fair, written prices.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Motor Repair Problems We See in Broadview Park Homes
- Solar panel shading from broadleaf canopy. Broadview Park’s mature trees, especially oak and ficus canopies, throw shade across small solar panels. The motor runs fine at noon and stalls at 4 p.m. We relocate panels, add battery capacity, or switch to a wired transformer when the wire run allows.
- Corroded rack and pinion teeth. Salt air from the coast, only a few miles east of Broadview Park, eats through cheap zinc-plated rack. The slide motor grinds, jumps teeth, and stalls mid-travel. We replace the rack with galvanized or stainless sections and realign the motor sprocket.
- Post footings cracked or leaning. Hurricanes and soft sandy soil shift gate posts on these unincorporated lots. A leaning post misaligns the swing arm, overloads the motor, and burns out capacitors. We set new steel post footings before reinstalling the operator.
- DIY control board wiring from previous owners. Broadview Park’s custom homes often come with gates wired by someone in the family. We see reversed polarity, missing photo-eye wiring, and bypassed safety edges. That wiring gets corrected before we touch the motor itself.
Pricing for Gate Motor Repair in Broadview Park, FL
Here’s what Broadview Park homeowners can expect on a written quote, line by line, before any work starts.
| Service | Typical Price Range in Broadview Park |
|---|---|
| Diagnostic visit (waived with repair) | $59 |
| Gate motor repair (component-level) | $250 – $475 |
| Gate motor and operator replacement | $850 – $1,700 |
| Remote programming or replacement | $95 – $180 |
| Receiver board replacement | $180 – $320 |
| Post footing reset (steel, concrete) | $400 – $850 |
These ranges reflect Broadview Park’s larger gate sizes, custom post work, and frequent need for solar or long wire runs on acreage lots. The estimate is free, and the number you agree to is the number you pay. Call (754) 354-9065 for a free estimate.
We Also Serve Cities Near Broadview Park
Our Gate Motor Repair in Broadview Park service area also covers nearby communities. If you’re in Fort Lauderdale, Ojus, Plantation, or Tamarac, we can schedule a visit at the same written-price standard. Same team, same Threshold Standard vetting, same guarantee.
Serving Broadview Park, FL - Our Local Coverage Area
We’re based in the Broadview Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Broadview Park
The motor is detecting resistance and reversing for safety. On Broadview Park lots, that resistance usually comes from a sagging hinge, a dragging gate wheel, or a post that shifted after rain. We check the mechanical load first, then inspect the motor’s force settings. Call (754) 354-9065 and we’ll diagnose it on-site with a written quote before any repair.
Yes, solar gate opener installation is a regular job for us in Broadview Park. We size the panel and battery for the gate’s weight and the shade pattern on your specific lot. Many of the older lots off SW 40th Avenue have no conduit to the post, so solar is the practical choice, and we set it up to hold charge through cloudy weeks.
That grinding is almost always the rack and pinion teeth wearing or filling with sandy debris. In Broadview Park, salt air speeds up that corrosion on cheaper zinc rack, and the stall comes from the motor’s current overload. We clean, inspect, and replace the rack section or the entire run. A free estimate is one call away at (754) 354-9065.
Yes, this is a seasonal rush for us after every hurricane warning in Broadview Park. We reinstall the panels, check the post alignment, re-balance the gate, and run the motor through full travel. If the storm shifted the post even slightly, we reset the footing before it strains the new motor. Call right after you’re cleared to return home.
No, that’s a keypad, receiver, or wiring problem, not a motor failure. The motor is receiving and executing a valid signal from the remote, so the motor is fine. We trace the keypad wiring, replace corroded connections, and reprogram the code. In Broadview Park’s humid climate, corroded keypad wiring is one of our most frequent non-motor repair calls.
Written by Cole Rafferty, Owner at Warden Gate Repair Fort Lauderdale, serving Broadview Park with Gate Motor Repair and Gate Motor Repair solutions.
If your gate is down, moving slowly, or making a noise it shouldn’t, call (754) 354-9065 now. We’ll send you a tech’s name and photo, give you a written price, and stand behind the work with the 365-Day Done Right Promise.