Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateLinear Gate Motor Repair in Fort Lauderdale: What to Know First
Linear gate motor repair in Fort Lauderdale typically runs $225 to $480 for most board, limit switch, and capacitor failures, and we complete the majority of Linear repairs the same day we arrive. As an independent Linear service provider, we’re not affiliated with the manufacturer, but we stock the parts that keep Linear openers running through South Florida humidity and salt air. If you own a Linear gate operator, this page tells you exactly what goes wrong, what it costs, and how we’ll fix it.
Call (754) 354-9065 for a free estimate with a written price before any work starts.
Key Takeaways
- We repair Linear slide and swing gate motors across Fort Lauderdale, including older LS series models
- Every job gets a written price before work begins, plus a 365-Day Done Right Promise
- Our techs carry Linear control boards, capacitors, and limit switches on the truck
- You’ll know your technician’s name and face before they ever reach your driveway
How Linear Products Fail – and How We Fix Them
- Linear LS series (LS-9 and LS-14 slide operators): failed limit switches after coastal salt exposure. These mechanical limits sit close to the gate track, and in Fort Lauderdale neighborhoods like Rio Vista and Coral Ridge, salt-laden air corrodes the contacts within two to three years. The gate either stops short of full close or reverses for no reason. We replace the switch assembly with a sealed marine-grade equivalent and re-set the limits on site.
- Linear LD050 and LD033 swing operators: capacitor failure from daily thermal cycling. Florida heat builds up inside the operator housing every afternoon, and the capacitor is the first component to give. The symptom is a motor that hums but won’t move the gate. We diagnose it by testing the capacitor under load, not just checking continuity, because weak capacitance often passes a simple meter test while still failing to start the motor.
- Linear control board failures from power surges after summer storms. Lightning strikes on the grid can spike through an opener’s transformer and fry the logic board. The gate either goes dead or the remote stops pairing. We stock OEM Linear boards for current production models and tested refurbished boards for discontinued ones, so a surge doesn’t mean a week of waiting on a part.
- Linear APeX series: phantom open commands and receiver drift. The APeX line’s receiver can pick up interference from nearby gate openers, garage door transmitters, even marine radios near the Intracoastal. The gate opens on its own or refuses to close. We re-flash receiver settings, install a shielded antenna, or replace the receiver module when it’s drifted beyond calibration.
- Linear slide opener chain or belt tension loss on older installs. The LS series uses a chain drive that stretches over time, especially on long gates in the Las Olas corridor where some drives run 20 feet or more. The gate jerks, shudders, or stalls mid-travel. We re-tension the chain or belt, inspect the sprockets and idler pulleys for wear, and replace only what’s actually worn, not the entire drive assembly.
Styles & brands we work with
Our Linear Gate Motor Repair Process
When you call us about a Linear opener, here’s exactly how the job runs.
- 1
You call, you talk to a person. A live dispatcher answers at (754) 354-9065. We ask what the gate is doing, listen to the symptoms, and schedule a window that works for you. We don’t park you in a voicemail queue.
- 2
We send your technician’s name and photo before arrival. That’s the Threshold Standard, and it applies to every visit. When the knock comes, you already know the face. Our techs are background-checked, identity-verified, and photo-badged.
- 3
Diagnostics happen before any repair. Our tech opens the Linear operator housing, tests the power supply, checks the capacitor, reads fault codes from the control board, and physically inspects the limit switches, drive chain, and gate hardware. You’ll hear the diagnosis in plain words before we touch a screwdriver for repairs.
- 4
We show you the written price and parts choice. If a failed part is OEM-specific, we quote the Linear part. If a quality aftermarket equivalent performs as well for less, we give you both numbers and let you choose. The price is written, it’s final, and it’s agreed before work starts.
- 5
We fix it, then test it hard. After the repair, we cycle the gate ten to fifteen times, test safety reverse pressure, re-check the limits, and confirm remotes and keypads work. We don’t call it done until the gate opens and closes the way Linear built it to.
- 6
You get the 365-Day Done Right Promise in writing. If the same repair fails within a year, the return visit is free. That’s the whole guarantee, no fine print hiding behind it.
What Linear Gate Motor Repair Costs in Fort Lauderdale
Here’s what we typically see on Linear openers in the area. These are honest ranges, not bait numbers.
- Capacitor replacement: $95 to $180 installed
- Limit switch repair or replacement: $145 to $250 installed
- Control board replacement: $225 to $420 depending on the Linear model and board availability
- Receiver or antenna module replacement: $130 to $220 installed
- Chain or belt re-tensioning with hardware adjustment: $110 to $190
- Full motor replacement on a current Linear model: $350 to $550 installed
The main price drivers are the age of your Linear opener, whether it’s a slide or swing model, and whether the part is current production or discontinued. Discontinued parts sometimes cost more because we source tested units from our vetted suppliers rather than gambling on unknown aftermarket boards. Call (754) 354-9065 and tell us what your gate is doing. The estimate is free, and you’ll get a written price before any work starts.
See the difference
Before
After
Before
After
Before
AfterWhy Fort Lauderdale Homeowners Call Warden Gate Repair Fort Lauderdale for Linear Work
Not every company that fixes gate motors actually understands Linear logic. We do. We service LiftMaster, Mighty Mule, Ghost Controls, and DoorKing too, which means when a Linear opener shares a mounting pattern or a receiver frequency with one of those brands, we already know the workaround. That matters when parts cross-reference and a $40 bracket saves a $400 motor replacement.
A warden is trusted to watch over a place and keep it secure. That’s the idea behind the name, and it’s the standard we hold every tech to. The 365-Day Done Right Promise means if our Linear repair fails within a year, we come back free. Every technician is background-checked, photo-badged, and sent to you by name and photo before arrival, the full Threshold Standard on every visit. No anonymous trucks backing into your driveway. No blank invoices after the work is done. Just a gate that opens and closes when it should.
FAQs
No, we’re an independent Linear service provider, not an authorized factory dealer. That independence lets us recommend the best fix for your gate rather than steering you toward a full replacement when a repair is the better call. We use OEM Linear parts when they’re the right choice and quality aftermarket parts when they outperform on value.
Yes. Our trucks carry Linear capacitors, limit switches, control boards for the most common LS, LD, and APeX models, and receiver modules. For discontinued parts we maintain relationships with tested-part suppliers so you’re not waiting weeks for a board that Linear no longer makes.
If the opener is under 10 years old and the motor itself runs, repair is usually the right call. A control board or capacitor failure is a $150 to $420 fix, whereas a new opener runs $1,500 to $3,500 installed. If the motor is seized, the gearboxes are worn through, and your Linear model was discontinued over a decade ago, replacement makes more sense. We’ll give you both numbers and let the math speak for itself. Call (754) 354-9065 and we’ll assess it on site.
Most Linear repairs are scheduled same-day or next-day across Fort Lauderdale, from Victoria Park to Tarpon River and out to Plantation. Emergency service is available for gates stuck open, which is a security problem that can’t wait. Call (754) 354-9065 and a live person will tell you the soonest available window, no bots, no callbacks.
If your Linear opener is still under the manufacturer’s warranty, and it’s within the coverage window, we’ll tell you before you spend a dollar. We don’t make those decisions for you. For most older Linear models in Fort Lauderdale, the warranty expired years ago, and independent repair is the practical path. We document every repair with a written guarantee of our own, the 365-Day Done Right Promise, regardless of manufacturer status.
Ready to Fix Your Linear Gate Motor in Fort Lauderdale?
A locked gate only protects you if it actually locks. If your Linear opener is acting up, call (754) 354-9065 for a free estimate. You’ll get a live person, a scheduled window, and a written price before any work starts. Your tech will arrive with a name and a face you already know, and the repair will be done right or we’ll make it right, free, for a full year. That’s how we’ve done it since 2008.
Written by Cole Rafferty, Owner, Warden Gate Repair Fort Lauderdale at Warden Gate Repair Fort Lauderdale, serving Fort Lauderdale and nearby areas.