Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Wilton Manors, FL
Warden Gate Repair is the gate company Wilton Manors homeowners call when a driveway gate stops opening, a motor burns out, or salt air has eaten through a hinge. Most of the city’s homes were built between the 1950s and 1970s, and many still have their original ornamental aluminum or wrought-iron gates. Between the humidity, the coastal air, and the tropical storms that roll through every summer, those gates need a different approach than what works inland. Call (754) 354-9065 and you’ll get a live person, a straight answer, and a written price before anyone touches your gate.
Why Wilton Manors Homes Are Different
Wilton Manors sits on a compact grid of residential streets with the Middle River cutting through it. The houses are close together, the lots are small, and a lot of property lines are marked by decorative driveway gates that have been standing since the Eisenhower administration. That age matters. We routinely see rusted hinge posts, sagging gate leaves, and operators that failed because moisture worked its way into the control board.
The air here is the real issue. Wilton Manors gets heavy seasonal rain, intense sun, and salt spray off the Atlantic, and that combination speeds up corrosion on every metal component a gate has. Hardware that would last fifteen years in Plantation or Tamarac might need replacement in half that time here. On the finger islands along the Middle River, the brackish water spray is constant, and we treat those gates with anti-corrosion coatings before we even think about the mechanical work.
There’s also a code detail worth knowing: several neighborhoods in Wilton Manors require driveway gates to swing inward rather than outward, a flood-zone requirement tied to evacuation routes and drainage. If your gate was installed years ago, it may never have been compliant, and we flag that when we’re out for any repair.
Styles & brands we work with
Our Main Wilton Manors Services
Wilton Manors homeowners call us most often for two things: a gate that won’t budge and a motor that’s given up. Each of these has its own dedicated Wilton Manors page, so you can read exactly what the work involves before you pick up the phone.
Gate Repair in Wilton Manors
A stuck driveway gate in Wilton Manors usually traces back to rusted hinges, a bent track, or a weld that finally let go after years of salt exposure. We repair the gate itself: the frame, the hinges, the wheels, the alignment. On older mid-century gates, the original hardware is often undersized for the weight of the gate, which is why the same hinge keeps failing. We inspect the whole assembly, not just the obvious break, and we give you a written price before we start. Full details are on our Gate Repair in Wilton Manors page.
Electric Gate Repair in Wilton Manors
Electric gates here face the double whammy of humidity and power surges from summer lightning storms. We see fried control boards, damaged safety sensors, and wiring that’s corroded inside the conduit. We troubleshoot the whole system from the keypad to the loop detector, and we carry sealed, storm-rated components because Wilton Manors weather demands them. Every repair includes the 365-Day Done Right Promise: if it fails, we come back free. The full scope is on our Electric Gate Repair in Wilton Manors page.
Gate Motor Repair in Wilton Manors
The gate motor is the box that slides or swings your gate automatically, and in Wilton Manors it’s the component most likely to fail during or after a storm. When a motor burns out, you’re often better off replacing it with a weather-sealed unit than rebuilding a fifteen-year-old one. We service LiftMaster, FAAC, BFT, and Mighty Mule motors, and we stock the common parts locally so we’re not waiting on a warehouse in another state. Read the specifics on our Gate Motor Repair in Wilton Manors page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Wilton Manors
We’re factory-trained on LiftMaster, FAAC, BFT, and Mighty Mule equipment, and we keep common boards, arms, and remotes stocked for the Wilton Manors area. Most motor repairs are done the same visit because the right part is already on the truck. See the full rundown on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Wilton Manors, FL
| Service | Typical range in Wilton Manors |
|---|---|
| Gate hinge replacement | $180 – $340 |
| Gate weld repair | $150 – $400 |
| Gate wheel or roller replacement | $120 – $260 |
| Gate alignment and adjustment | $100 – $250 |
| Electric gate diagnostic visit | $75 – $150 |
| Control board replacement | $300 – $700 |
| Safety sensor replacement | $150 – $350 |
| Gate motor replacement | $500 – $1,200 |
| Keypad or intercom replacement | $150 – $400 |
| Full gate automation install | $1,800 – $4,500 |
Prices in Wilton Manors can push toward the top of these ranges when a gate needs anti-corrosion work first, or when a motor replacement requires rewiring that wasn’t done to code decades ago. Whatever the number, you’ll see it in writing and agree to it before any work starts. No surprises at the end.
Neighborhoods We Serve in Wilton Manors
We work across the whole city, from the finger islands along the Middle River to the inland streets near the Oakland Park border. Wilton Manors is small enough that we can usually reach most addresses quickly, often the same day you call.
- Middle River Terrace
- Colohatchee Park area
- Wilton Manors East
- Island City neighborhoods
- Five Points area
Service Area – Cities Near Wilton Manors
If your gate is just outside the Wilton Manors line, we’ve got you covered. We also serve Fort Lauderdale, FL, Ojus, FL, Plantation, FL, and Tamarac, FL. Same live phone line, same written-price promise, same tech with a name and photo before the visit.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Wilton Manors
Most Wilton Manors calls get a same-day or next-day visit, because the city is compact and our crews are staged nearby. Emergency calls, like a gate stuck open overnight, get priority. Call (754) 354-9065 and the dispatcher will tell you exactly when a tech can be there.
Repairing an existing gate rarely requires a permit, but some Wilton Manors HOAs and the city’s flood-zone rules do have standards for gate swing direction and materials. We’ll flag anything that looks non-compliant while we’re there, and we can adjust the work to match what your association requires.
Yes. Gates near the Middle River and its canals get brackish spray that rusts standard hardware fast. We use corrosion-resistant fasteners and treat the metal before reassembling, which is standard practice for us in Wilton Manors and not an add-on charge.
If your gate is acting up in Wilton Manors, call (754) 354-9065. You’ll get a live person, a straight answer about cost, and a written price before anything gets touched. That’s how every Warden Gate Repair visit works, every time.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wilton Manors Customers Say
"Slide gate stopped halfway and the motor just hummed. Tech showed his ID, tested the limit switch and found a worn roller wheel. Replaced both and the gate glides again."
- Curtis B."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R."Gate was closing on my truck bumper. The loop detector had failed. Replaced it and adjusted the force setting."
- Dina K.